top of page

Hot Water Recirculation System | Water Heater Pros | Sacramento, Ca

Hot Water Recirculation

Instant Hot Water at Every Faucet

How long do you wait for hot water when you turn on the faucet? Thirty seconds, 1 minute, 2 or 3 minutes, longer? While you wait, a home with five taps can waste up to 15,000 gallons of tempered water down the drain. You pay for this potable water, wasted energy, and sewage fees. Getting hot water instantly at every faucet is now possible. Water heater pros can install a Taco® Hot Link recirculation system.

Hot Link drawing.jpeg
Taco Hot-Link System

Instant Hot Water

No additional plumbing or electrical is needed! Hot-Link® is a quick, easy retrofit using the existing plumbing. Mount the valve under the sink furthest from the water heater and the pump at the water heater. The valve's unique thermal disc technology sends cooled water back to the water heater so hot water lines remain hot.

TACO® Hot-Link® System
Hot Water Recirculation Systems

Taco technology saves thousands of gallons of water each year.
According to the Department of Energy, the average household wastes up to 12,000 gallons of water each year waiting for hot water. That’s energy, money, and resources down the drain. We have the domestic hot water recirculation solutions that are right for the job, including our, Hot-Link
® System.

Instant hot water. No additional plumbing or electrical!
Hot-Link
® System is a quick, easy retrofit using the existing plumbing. Mount the by-pass valve under the sink and the pump at the water heater. The valve’s unique thermal disk technology sends cooled water back to the water heater so hot water lines remain hot.

Cleaning made easy.
There’s no need to remove the Hot-Link valve from the piping to keep it clean. Our exclusive clean-in-place design makes short work of keeping the system operating properly.

The Problem: Waiting for Hot Water

It’s a common problem: turn on the faucet or shower for hot water, then wait for it to arrive. In fact, the wait can be minutes in larger homes with multiple bathrooms and long runs of pipe between the plumbing fixtures and the water heater! With a Taco Domestic Hot Water Recirculation System in place, there’s no more wait. Instant hot water!

 

Waiting Means Wasting

Waiting for hot water sends millions of gallons of cooled water down the drain each year. In fact, an average family of four wastes up to 12,000 gallons of water each year waiting for hot water.* Water conservation is so important that many US states and municipalities routinely impose watering bans and offer rebate incentives to help conserve this natural resource.

 

*Source: Dept. of Energy study.

 

Energy Down The Drain

Of course, all that “waiting water” contains some heat energy (BTU’s), even if it’s only room temperature. Wasting those BTU’s and starting over with fresh, cold water to heat up requires even more heat energy. So in addition to wasting water, millions of BTU’s and energy dollars are wasted, too.

 

The Solution: Install a Taco Domestic Hot Water

Recirculation (DHWR) Product

Provide your customers with the comfort and convenience of instant hot water without the waste. Taco DHWR products are designed to meet a variety of DHWR system types, and offer customers a wide range of options to control hot water delivery to faucets and showers.

 

System Types & Products

Dedicated return line piping

This system is provided with a dedicated return line installed between the end of the hot water supply pipe and the water heater. A circulator is installed in the piping loop to move the hot water from the water heater through the supply pipe and back through the return pipe.

 

Taco provides four great options for this system:

• 006e3™

• SmartPlus-e™ (Bundle Packaging)

• Plumb n'Plug®

• TacoGenie®

• SmartPlug® (with any corded circulator)

 

Piping without a return line

A domestic hot water system without a dedicated return line requires a "point of use" product that is typically installed at the fixture furthest from the water heater. The cold water supply pipe is used as the return line to the water heater.

 

Taco provides four great options for this system:

• Hot-LinkPlus-e (Bundle Packaging)

• Hot-Link® System

• TacoGenie®

Call us for a free quote 916-344-4500

WATER-

 HEATERS

bottom of page